Determination of the surface tension coefficient of ferrites 600NN upon sintering

Abstract

The manufacturing process of ferrite production consists in a chain of structural and phase transformations resulted in formation of ferrite ceramics from disperse systems (their solid phase is represented by metal oxides). The forces of surface tension play a crucial role at all stages of the technological process. A decrease in surface tension forces during grinding due to the use of surfactants (surface active substances) leads to better disaggregation of the components (both original and ferritized). The use of surfactants reduces interparticle friction and provides manufacturing of more dense workpieces at the stage of pressing. Microadditives promote faster formation of contact isthmuses. The goal of the study is to develop a method for determining the surface tension coefficient of 600NN ferrite material during sintering. The proposed approach is based on measurements of the shrinkage of various fragments of a vertically sintered ferrite rod, which are used to determine the values of the coefficient. It is shown that the surface tension coefficient of the studied ferrite material during sintering was σ = 65.2 ± 13.0 N/m with a confidence probability of 95%. The results obtained can be used to study the effect of the sintering temperature, the size of sintered particles, the amount and quality of alloying additives on the forces of surface tension. Moreover, the data can be used in the study of the relationship between the value of the surface tension coefficient and the parameters of the microstructure.