Preview

Industrial laboratory. Diagnostics of materials

Advanced search

Study of temperature fields in samples of polymer materials using dynamic mechanical analysis

https://doi.org/10.26896/1028-6861-2022-88-10-37-42

Abstract

   The goal of the study is to reveal the dependence of the glass transition temperature on conditions of its determination. We present the results of studying temperature fields in the samples of polymer materials by the method of dynamic mechanical analysis. Changes in the glass transition temperature of the poly­mer casting VSE-34 and the temperature profile in the polymer matrix ED-20/DAFS were analyzed. Stan­dard melting samples were used to correct the test results using the correction function. It is shown that the most significant temperature deviations are observed when measured in argon and helium media with heating rates of 1, 2, 5, and 5 K/min. The temperature distribution over the polymer casting sample is highly non-uniform. The difference between the temperature in the middle and at a distance of 1/4 from the edge of the sample equals 16°C (medium — argon, heating rate — 5 K/min). Moreover, at a heating rate of 1 K/min, abnormally low values of the glass transition index were marked. The results obtained can be used to improve the measurement procedure, reduce test duration and refine the results of tests in various gaseous media.

About the Authors

M. A. Gorbovets
Ail-Russian scientific research institute of aviation materials NRC 'Kurchatov Institute" — VIAM
Russian Federation

Mikhail A. Gorbovets

105005

17, ul. Radio

Moscow



P. S. Marakhovskiy
Ail-Russian scientific research institute of aviation materials NRC 'Kurchatov Institute" — VIAM
Russian Federation

Petr S. Marakhovskiy

105005

17, ul. Radio

Moscow



N. N. Vorobyov
Ail-Russian scientific research institute of aviation materials NRC 'Kurchatov Institute" — VIAM
Russian Federation

Nikita N. Vorobyov

105005

17, ul. Radio

Moscow



Y. M. Gurevich
Всероссийский НИИ авиационных материалов НИЦ «Курчатовский институт» — ВИАМ
Russian Federation

Yakov M. Gurevich

105005

17, ul. Radio

Moscow



References

1. Osipova V. A. Experimental study of heat transfer processes. — Moscow: Energiya, 1969. — 392 p. [in Russian].

2. Ponomarev S. V., Mishchenko S. V., Divin A. G., Vertrogradsky V. A., Churikov A. A. Theoretical and practical foundations of thermophysical measurements. — Moscow: Fizmatlit, 2008. — 408 p. [in Russian].

3. Platunov E. S., Baranov I. V, Buravoy S. E., Kurepin V. V. Thermophysical measurements: textbook, the manual. — St. Petersburg: SPbGUNiPT, 2010. — 738 p. [in Russian].

4. Shimkin A. A. The influence of purge gas on the glass transition temperature / Zavod. Lab. Diagn. Mater. 2014. Vol. 80. N 11. P 40 - 43 [in Russian].

5. Kablov E. N., Startsev O. V, Krotov A. S., Kirillov V. N. Climatic aging of composite materials for aviation purposes. I. Aging mechanisms / Deform. Razrush. Mater. 2010. N 11. P. 19-27 [in Russian].

6. Kablov E. N., Startsev O. V, Krotov A. S., Kirillov V. N. Climatic aging of composite materials for aviation purposes. II. Relaxation of initial structural disequilibrium and gradient of properties in thickness / Deform. Razrush. Mater. 2010. N 12. P. 40-46 [in Russian].

7. Kablov E. N. Innovative developments of FSUE "VLAM" SSC RF on the implementation of "Strategic directions for the development of materials and technologies of their processing for the period up to 2030" / Aviats. Mater. Tekhnol. 2015. N 1 (34). P 3 - 33 [in Russian]. DOI: 10.18577/2071-9140-2015-0-1-3-33

8. Koval T. V, Veligodsky I. M., Gromova A. A. Investigation of the plasticizing effect of moisture on the properties of PCM based on the epoxy binder VSE-34 after 5 years of exposure in various climatic zones / Tr. VLAM. 2021. N 9. Art. 11 [in Russian]. DOI: 10.18577/2307-6046-2021-0-9-105-116

9. Bartenev G. M., Barteneva A. G. Relaxation properties of polymers. — Moscow: Khimiya, 1992. — 384 p. [in Russian].

10. Kablov E. N., Laptev А. В., Prokopenko A. N., Gulyaev A. I. Relaxation of polymer composite materials under pro­longed exposure to static load and climate (review) / Aviats. Ma­ter. Tekhnol. Elektron. Nauch. - Tekhn. Zh. 2021. N 4. P 70 - 80 [in Russian]. DOI: 10.18577/2713-0193-2021-0-4-70-80

11. Startsev V. O., Molokov M. V, Postnov V. I., Starostina I. V. Assessment of the influence of climatic effects on the properties of fiberglass of the VPS-53K brand / Izv. Samar. NTs RAN. 2017. Vol. 19. N 4 (2). P. 220 - 228 [in Russian].

12. Slavin A. V., Startsev O. V. Properties of fiberglass and carbon fiber plastics at an early stage of climatic impact / Tr. VLAM. 2018. N 9. Art. 8 [in Russian]. DOI: 10.18577/2307-6046-2018-0-9-71-82

13. Kolobkov A. S. Polymer composite materials for various air­craft structures (review) / Tr. VLAM. 2020. N 7. Art. 5 [in Russian]. URL: https://cyberleninka.ru/article/n/polimernye-kompozitsionnye-materialy-dlya-razlichnyh-konstruktsiy-aviatsionnoy-tehniki-obzor?ysclid=l9mqpegz6g510285065


Review

For citations:


Gorbovets M.A., Marakhovskiy P.S., Vorobyov N.N., Gurevich Y.M. Study of temperature fields in samples of polymer materials using dynamic mechanical analysis. Industrial laboratory. Diagnostics of materials. 2022;88(10):37-42. (In Russ.) https://doi.org/10.26896/1028-6861-2022-88-10-37-42

Views: 340


ISSN 1028-6861 (Print)
ISSN 2588-0187 (Online)