Preview

Industrial laboratory. Diagnostics of materials

Advanced search

Analytical Capabilities of Spark Sampling Device for ICP-AES Analysis of Metal Samples

https://doi.org/10.26896/1028-6861-2018-83-1-II-77-81

Abstract

The analytical performance of a spark sampling device “Aspect” (“VMK-Optoelektronika”) is evaluated for steel analysis by atomic emission spectrometry with inductively coupled plasma (ICP-AES). The results of studying the effect of pulse duration, frequency and current of the spark discharge on the character of sample erosion, size and quantity of aerosol particles are presented. The dependences of the analytical signal on the spark duration are obtained and the optimal duration of preliminary sparking is specified. The limit of Cr, Cu, Mn, Mo, Ni, P, Si, and V detection ranges from n x 105 to n x 102 % wt. The accuracy of the ICP-AES analysis with a spark sampling using standard reference sample showed the good agreement between certified and determined values of analyte concentration.

About the Authors

D. Yu. Troitskiy
Институт неорганической химии им. А. В. Николаева СО РАН
Russian Federation


N. S. Medvedev
Институт неорганической химии им. А. В. Николаева СО РАН
Russian Federation


A. I. Saprykin
Институт неорганической химии им. А. В. Николаева СО РАН
Russian Federation


References

1. Human H. G. C., Scott R. H., Oakes A. R., et al. The use of spark as a sampling-nebulising device for solid samples in atomic-absorption, atomic-fluorescence and inductively coupled plasma emission spectrometry / Analyst. 1976. Vol. 101. P. 265 - 271.

2. Aziz A., Brokaert J. A. C., Laqua K., et al. A study of direct analysis of solid samples using spark ablation combined with excitation in an inductively coupled plasma / Spectrochim. Acta. Part B. 1984. Vol. 39. N9-11. P. 1091 - 1103.

3. Prell L. J., Koirtyohann S. R. Analytical performance and transport studies using spark sampling followed by ICP excitation with a sequential spectrometer / Appl. Spectrosc. 1988. Vol. 42. N 7. P. 1221 - 1228.

4. Raeymaekers B., Van Espen P., Adams F., et al. A characterization of spark-produced aerosols by automated electron-probe microanalysis / Appl. Spectrosc. 1988. Vol. 42. N 1. P. 142 - 150.

5. Marks J. Y., Fornwalt D. E., Yungk R. E. Application of a solid sampling device to the analysis of high temperature alloys by ICP-AES / Spectrochim. Acta. Part B. 1983. Vol. 38. N 1 - 2. P. 107 - 113.

6. Hinds M. W., Kogan V. V. Determination of silicon in fine gold by solution and solid sample graphite furnace atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry / J. Anal. At. Spectrom. 1994. Vol. 9. P. 451 - 455.

7. Житенко Л. П., Талдонов Ю. В., Озерова Л. Е. и др. Определение примесей в золоте методом атомно-эмиссионной спектрометрии с индуктивно-связанной плазмой и искровой абляцией / Заводская лаборатория. Диагностика материалов. 2001. Т. 67. № 6. С. 22 - 24.

8. Гаврилюков H. H., Самопляс В. H., Мандрыгин В. В. Возможности применения ИСП спектрометра с искровой абляцией на предприятиях черной металлургии / Заводская лаборатория. Диагностика материалов. 2007. Т. 73. № 6. С. 22 - 27.

9. Гаврилюков H. H., Самопляс В. H., Мандрыгин В. В. и др. Использование градуировки по растворам для ИСП-АЭС анализа металлических образцов с искровой абляцией / Заводская лаборатория. Диагностика материалов. 2006. Т. 72. № 3. С. 3 - 11.

10. Медведев Н. С., Гаврилюков H. H., Кукарин В. Ф. и др. Использование тандем-градуировки для анализа сталей и сплавов методом атомно-эмиссионной спектрометрии с индуктивно связанной плазмой / Журн. аналит. химии. 2013. Т. 68. № 7. С. 679 - 687.

11. Медведев Н. С., Кукарин В. Ф., Сапрыкин А. И. Использование тандем-градуировки для прямого анализа меди методом атомно-эмиссионной спектрометрии с индуктивно связанной плазмой (ИСП-АЭС) / Журн. аналит. химии. 2013. Т. 68. № 8. С. 755 - 763.


Review

For citations:


Troitskiy D.Yu., Medvedev N.S., Saprykin A.I. Analytical Capabilities of Spark Sampling Device for ICP-AES Analysis of Metal Samples. Industrial laboratory. Diagnostics of materials. 2017;83(1 p.II):77-81. (In Russ.) https://doi.org/10.26896/1028-6861-2018-83-1-II-77-81

Views: 485


ISSN 1028-6861 (Print)
ISSN 2588-0187 (Online)