Quantitative Evaluation of Bauschinger Effect in Magnesium Alloys with Asymmetry Effect
Abstract
Features of quantitative evaluation of the Bauschinger effect in magnesium alloys with an asymmetry of deformation behavior regarding tension and compression are considered. It is found that the Bauschinger effect is associated with different contribution of detwinning in total strain in different loading directions. A quantitative evaluation of this effect using stress- and work of deformation approaches renders very close results. The asymmetry of deformation upon tension and compression in magnesium alloys similarly affects both the yield stress and deformation contribution of detwinning in total plastic strain. Parameters of the Bauschinger effect are close to zero when the first loading excursion is in compression, which means this effect is very weak and inelasticity is mostly connected with the twinning process upon tension. The comparison of the Bauschinger effect for commercial ZK60 and promising Mg-based ZE10 (alloyed with rare earths) engineering alloys univocally points to better properties ofthe latter.
About the Authors
D. L. Merson
Тольяттинский государственный университет
Russian Federation
Russian Federation
E. V. Vasil’Ev
Тольяттинский государственный университет
Russian Federation
Russian Federation
A. Yu. Vinogradov
Тольяттинский государственный университет; Норвежский университет естественных и технических наук
Russian Federation
Russian Federation
References
1. Mordike B. L., Ebert T. Magnesium: properties - applications - potential / Mater. Sci. Eng. A. 2001. Vol. 302. N 1. P. 37 - 45.
2. Wolff M., Ebel T., Dahms M. Sintering of magnesium / Advanced Engineering Materials. 2010. Vol. 12. N 9. P. 829 - 836.
3. Ben Hamu G., Eliezer D., Shin K. S. The relation between processing, microstructure and corrosion behavior of new magnesium alloys for transportation application / 47th Annual Conference of the Australasian Corrosion Association 2007: Corrosion Control, 2007. P. 906.
4. Hirsch J., Al-Samman T. Superior light metals by texture engineering: optimized aluminum and magnesium alloys for automotive applications / Acta Mater. 2013. Vol. 61. N 3. P. 818 - 843.
5. Luo A. A. Magnesium: current and potential automotive applications / JOM. 2002. Vol. 54. N 2. P. 42 - 48.
6. Liu W. C., Dong, J., Zhang P., Yao Z. Y., Zhai C. Q., Ding W. J. High cycle fatigue behavior ofas-extruded ZK60 magnesium alloy / J. Mater. Sci. 2009. Vol. 44. N 11. P. 2916 - 2924.
7. Shiozawa K., Kitajima J., Kaminashi T., Murai T., Takahashi T. Low-cycle fatigue deformation behavior and evaluation of fatigue life on extruded magnesium alloys / Proc. Eng. 2011. Vol. 10. P. 1244 - 1249.
8. Lin X. Z., Chen D. L. Strain controlled cyclic deformation behavior of an extruded magnesium alloy / Mater. Sci. Eng. A. 2008. Vol. 496. N. 1. P. 106-113.
9. Yin S. M., Yang F., Yang X. M., Wu S. D., Li S. X., Li G. Y. The role of twinning - detwinning on fatigue fracture morphology of Mg - 3% Al - 1% Zn alloy / Mater. Sci. Eng. A. 2008. Vol. 494. N 1. P. 397 - 400.
10. Proust G., Tomé C. N., Jain A., Agnew S. R. Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31 / Int. J. Plasticity. 2009. Vol. 25. N 5. P. 861 - 880.
11. Wu L., Jain A., Brown D. W., Stoica G. M., Agnew S. R., Clausen B., Liaw P. K. Twinning - detwinning behavior during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy, ZK60A / Acta Mater. 2008. Vol. 56. N 4. P. 688 - 695.
12. Lee S. Y., Wang H., Gharghouri M. A. Twinning-detwinning behavior during cyclic deformation of magnesium alloy / Metals. 2015. Vol. 5. N2. P. 881 -890.
13. Christian J. W., Mahajan S. Deformation twinning / Progr. Mater. Sci. 1995. Vol. 39. N1. P. 1-157.
14. Barnett M. R. Twinning and the ductility of magnesium alloys: Part I. “Tension” twins / Mater. Sci. Eng. A. 2007. Vol. 464. N 1. P. 1 - 7.
15. Barnett M. R. Twinning and the ductility of magnesium alloys: Part II. “Contraction” twins / Mater. Sci. Eng. A. 2007. Vol. 464. N 1. P. 8 - 16.
16. Bauschinger J. Ueber die veranderung der elasticitatsgrenze und elasticitatsmodul verschiedener / Metal caviling. 1881. Vol. 27. P. 289 - 348.
17. Mc’Lin D. Mekhanicheskie svoistva metallov [Mechanical properties of metals]. - Moscow: Metallurgiya, 1965. - 431 p. [in Russian].
18. Lemoine X., Aouafi A. Bauschinger effect correspondence of experimental tests / Int. J. Mater. Forming. 2008. Vol. 1. N 1. P. 241 - 244.
19. Abel A. Historical perspectives and some of the main features of the Bauschinger effect / Materials Forum. - Institute of Metals and Materials Australasia. 1987. Vol. 10. N 1. P. 11 - 26.
20. Stolyarov V. V. Effect Baushingera v ultramelkozernystykh materialakh [Baushinger effect in ultra-finegrained metals materials] / Zavod. Lab. Diagn. Mater. 2006. Vol. 72. N 9. P. 45 - 49 [in Russian].
21. Vinogradov A., Vasilev E., Linderov M., Merson D. In situ observations of the kinetics of twinning - detwinning and dislocation slip in magnesium / Mater. Sci. Eng. A. 2016. Vol. 676. P. 351 - 360.
Review
For citations:
Merson D.L., Vasil’Ev E.V., Vinogradov A.Yu. Quantitative Evaluation of Bauschinger Effect in Magnesium Alloys with Asymmetry Effect. Industrial laboratory. Diagnostics of materials. 2017;83(3):55-58. (In Russ.)
Views:
392
Email this article 