GENERALIZED CORRELATION DEPENDENCE BETWEEN THE TENSILE STRENGTH AND HARDNESS OF STEELS
https://doi.org/10.26896/1028-6861-2017-83-11-52-57
Abstract
Critical analysis of the form of representing correlation between the tensile (ultimate) strength σB and hardness of steels is presented. Simple analytical expressions are derived using statistical analysis, which provide more accurate description of the relationships between Brinell and Rockwell scale hardness values and tensile strength σB. The results of σB calculations by steel hardness using known and developed formulas are compared. The developed formulas are used to analyze changes in σB of carbon steels under the impact of heat treatment. Quantitative evaluations of the effect of quenching and tempering temperatures on the changes in σB values in carbon steels 35, U8, and U10 are based on the results of HRC hardness measurements. The developed formulas can be also used for other steels proceeding from the data on their measured hardness value or reference data presented in literature.
About the Author
S. G. Sandomirski
Объединенный институт машиностроения НАН Беларуси, г. Минск
Belarus
Belarus
References
1. Lakhtin Yu. M., Leont’eva V. P. Materials: A Textbook for high schools of engineering. 2nd edition. — Moscow: Mashinostroenie, 1980. — 493 p. [in Russian].
2. Agamirov L. V. Mechanical Engineering. Encyclopedia. In 40 vols. Section 2. Materials in Mechanical Engineering. Vol. 2-1. Physical-mechanical properties. Tests of Metallic Materials. — Moscow: Mashinostroenie, 2010. — 851 p. [in Russian].
3. State Standard GOST 1497–84. Metals. Methods of tension test. — Moscow: Izd. standartov, 1990. — 52 p. [in Russian].
4. Markovets M. P. Determination of mechanical properties of metals hardness. — Moscow: Mashinostroenie, 1979. — 171 p. [in Russian].
5. ISO 6506–81. Metals. Hardness test — Brinell test.
6. ISO 6508–86. Metals. Hardness test — Rockwell test — scales A, B, C, D, E, F, G, H, K.
7. State Standard GOST 22761–77. Metals and alloys. Brinell hardness test by static action portable hardness meters. — Moscow: Izd. standartov, 1989. — 10 p. [in Russian].
8. Bershtein M. L., Rakhshtadt A. G. (eds.). Metallurgy and heat treatment of steel: a guide. In 3 vols. 4th Edition. Vol. 1. Methods of testing and research. In 2 books. — Moscow: Metallurgiya, 1991.
9. RTM 3-1947–91. Steering the technical material. Design standards. Metals and alloys. Transferable hardness table. — 31 p. [in Russian].
10. Mal’kov O. V., Litvinenko A. V. Measurement of hardness metals. Electronic textbook. — Moscow: MGTU im. N. Й. Baumana, 2011. — 19 p. [in Russian].
11. Tylkin M. A. Directory treater repair service. — Moscow: Metallurgiya, 1981. — 648 p. [in Russian].
12. Dempsey J. Hardness Conversion Table: Brinell to Rockwell A B C / http://www.anvilfire.com/FAOs.hardness.htm.
13. RD ÉO 0027–2005. Instructions for determining the mechanical properties of nuclear power plants equipment metal bezobraztsovymi methods for hardness characteristics. — Moscow: FGUP kontsern «Rosénergoatom», 2006. — 47 p. [in Russian].
14. Bida G. V., Nichipuruk A. P. Magnetic properties of the heat treatment steels. — Yekaterinburg: UrO RAN, 2005. — 218 p. [in Russian].
15. Sandomirski S. G. Effect of Measurement Accuracy and Range of Variation of a Physical Quantity on the Correlation Coefficient / Measurement Techniques. Vol. 57. Issue 10(2014). P. 1113 – 1120.
Review
For citations:
Sandomirski S.G. GENERALIZED CORRELATION DEPENDENCE BETWEEN THE TENSILE STRENGTH AND HARDNESS OF STEELS. Industrial laboratory. Diagnostics of materials. 2017;83(11):52-57. (In Russ.) https://doi.org/10.26896/1028-6861-2017-83-11-52-57
Views:
623
Email this article 