A UNIFIED TECHNIQUE OF DETERMINING MASS FRACTIONS OF THE IMPURITIES IN PLATINUM-RHODIUM ALLOYS BY ATOMIC EMISSION SPECTROSCOPY (AES)
https://doi.org/10.26896/1028-6861-2018-84-4-22-26
Abstract
A unified technique of AES determination of the impurities in platinum-rhodium alloys is presented. A distinctive feature of the technique is the possibility for analysis of the alloys of the grades not determined by GOSTs, which are widely used in industry. Almost no standard samples (their development is a long and expensive process) are available for such alloys. The technique provides determination of the impurities in platinum-rhodium alloys with rhodium contents of 0.1% – 35 % wt. without using an adequate standard sample for each particular alloy. The unified technique of AES determination of silver, gold, copper, iron, nickel, lead, palladium, antimony, tin, zinc and other in platinum-rhodium alloys (containing up to 36% of rhodium) is thus developed. Certified standard samples were used to plot the calibration curves. The accuracy indices of the developed unified technique are not inferior to those of the procedures developed earlier for platinum and platinum – rhodium alloys.
About the Authors
O. E. PukhovaRussian Federation
Olga E. Pukhova
T. F. Vasekina
Russian Federation
JSC «Research and Production Complex «Supermetal»
References
1. MVI SM-004–2015. The method of measurement of mass fraction of impurities in the platinum, rhodium and palladium alloys by atomic emission spectroscopy. — Moscow, 2015. — 13 p. [in Russian].
2. Zolotov Yu. A., Varshal G. M., Ivanov V. M. Analytical chemistry of platinum group metals. — Moscow: Komkniga, 2005. — 591 p. [in Russian].
3. RF State Standard GOST 33728–2016. Platinum. Methods of atomic-emission analysis with arc excitation of spectrum. — Moscow: Standartinform, 2016. — 19 p. [in Russian].
4. Kurbatova I. B., Lisienko M. D., Petreeva E. Yu. Development of the unified platinum-iridium alloys analysis method / Analitika i kontrol’. 2005. Vol. 9. N 2. P. 170 – 175 [in Russian].
5. Petreeva E. Yu., Lisienko D. G., Kurbatova I. B., Lisienko M. D. Analysis of the platinum-rhodium alloys using MAES analyzer / Analit. Kontrol’. 2005. Vol. 9. N 2. P. 176 – 181 [in Russian].
6. Emission spectrometer «SPAS 01», user manual. — St. Petersburg: JSC «IVS», 2008.
7. The spectrograph DFS-8. Instruction to use. — Leningrad: 1968. — 256 p. [in Russian].
8. RF State Standard GOST R ISO 5725-2–2002. Accuracy (trueness and precision) of methods and measurement results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method. — Moscow: Gosstandart Rossii, 2002. — 42 p. [in Russian].
9. RMG 61–2010. State system for ensuring the uniformity of measurements. Accuracy, trueness and precision measures of the procedures for quantitative chemical analysis. Methods of evaluation. — Moscow: Standartinform, 2012. — 58 p. [in Russian].
10. MVI SM-009–2017. Determination of impurities in samples of platinum-rhodium alloys by atomic emission spectroscopy. — Moscow, 2017. — 12 p. [in Russian].
11. Pukhova O. A unified method of determining a mass fraction of impurities in the platinum-rhodium alloys by atomic emission spectroscopy / Abstrs. of the Thord. Congr. of Anlytics of Russia, 8 – 13 October 2017. Moscow: URL: http: wssanalytchem.org/org/car2017/Publications/2017-Abstracts.pdf Moscow: GEOKhI RAN, 2017. P. 310 (accessed December 1, 2017) [in Russian].
Review
For citations:
Pukhova O.E., Vasekina T.F. A UNIFIED TECHNIQUE OF DETERMINING MASS FRACTIONS OF THE IMPURITIES IN PLATINUM-RHODIUM ALLOYS BY ATOMIC EMISSION SPECTROSCOPY (AES). Industrial laboratory. Diagnostics of materials. 2018;84(4):22-26. (In Russ.) https://doi.org/10.26896/1028-6861-2018-84-4-22-26