DETECTION OF INTEGRITY DEFECTS IN ALUMINUM SPECIMENS BY THE MAGNETIC PULSE METHOD
https://doi.org/10.26896/1028-6861-2019-85-4-28-32
Abstract
Experimental time dependences of the electric voltage U(t), taken from the induction magnetic head when scanning it with a magnetic carrier with magnetic field records of artificial defects of the integrity (slits) with a width of (1.0 - 10.0) x 10-5 m in aluminum plates from 1.5 x 10-6 to 2.0 x 10-3 m are presented. On the magnetic carrier the magnetic fields of the defects that occur when aluminum plates are exposed to a pulse of magnetic field of plane inductor (action time of about 1.0 x 10-4 sec). Dependences of U(t) for different depths of bedding of the defects and thickness of the layer of the material above them in the specified ranges of influences are obtained. In this case, distributions of instantaneous magnetic fields are recorded on the surface area of objects of the order of 1.0 x 10-3 m2 with a resolution in the measurement plane of 1.0 x 10-8 m2. The novelty of the method consists in determination of the amplitude of the main pulse of the field and build up time, the shape of the leading and trailing edges, as well as the amplitude, build up time, the number and polarity of the outliers of magnetic field, direction of the applied field, operations of smoothing, calculation, separation of the useful signal and operations of recognition of the defect information recorded on the magnetic medium with analysis of the dependences U(t). The developed method for controlling objects from electrically conductive materials makes it possible to increase several times the accuracy and speed of the control of the integrity defects in diamagnetic and paramagnetic metals.
About the Authors
Vladimir V. Pavlyuchenko
Belarusian National Technical University, Minsk
Belarus
Belarus
Elena S. Doroshevich
Belarusian National Technical University, Minsk
Belarus
Belarus
References
1. Falkevich A. S., Khusanov М. Kh. Magnetographic inspection of welded joints. — Moscow: Mashinostroenie, 1966. — 176 p. [in Russian].
2. Kozlov V S. The technique of magnetographic flaw detection. — Minsk: Visheyshaya shkola, 1976. — 256 p. [in Russian] .
3. Mikhailov S. P., Shcherbinin V E. Physical basis of magnetographic flaw detection. — Moscow: Nauka, 1992. — 238 p. [in Russian].
4. Shur M. L., Novoslugina A. P., Smorodinsky Ya. G. Magnetic field of a defect of arbitrary shape in a plane-parallel plate / Defektoskopiya. 2015. N 11. P 14 - 27 [in Russian].
5. Pechenkov A. N., Shcherbinin V E., Shleenkov S. A., et al. Calculation relationships for software development for the calculation of magnetostatic fields of defects in ferromagnetic products of arbitrary shape / Defektoskopiya. 2017. N 11. P 3 - 12 [in Russian].
6. Gruzintsev A. A., Mikhailov S. P. Self-consistent calculation of the magnetic field for magnetic defectoscopy problems. I. The initial model for calculating the magnetic tape field magnetized from a conductor with a current / Defektoskopiya. 2011. N 2. P 2 2 - 3 0 [in Russian].
7. Luhvich A. A., Bulatov O. V, Lukyanov A. L., et al. Control by the magnetodynamic method of the thickness of nickel coatings by subchromes on two-layer (nonferromagnetic-ferromagnet) substrates / Defektoskopiya. 2015. N 1. P 3 - 10 [in Russian].
8. Sukhanov D. Ya., Sovpel E. S. Magnetoinductive introscopy for flaw detection of metal objects / Defektoskopiya. 2015. N 5. P 56 - 62 [in Russian].
9. Pechenkov A. N., Shcherbinin V E. Eddy currents and fields of conducting and magnetizing spherical inclusions into a nonmagnetic medium / Defektoskopiya. 2016. N 4. P 48 - 55 [in Russian].
10. Atavin V G., Uzkikh A. A., Iskhuzhin R. R. A detuning from the electrical conductivity of the base when measuring the thickness of conductive coatings by the method of eddy currents / Defektoskopiya. 2018. N 1. P 58 - 64 [in Russian].
11. Rep. Belarus Pat. 12742, IPC CI BY, G 01 N 27/72. Magnetooptical flaw detector / V V Pavlyuchenko, E. S. Doroshevich; applicant and owner: BNTU. — N a20071581; appl. 19.12.2007; publ. 07.10.2009. Byull. N 6 [in Russian].
12. Pavlyuchenko V V., Doroshevich E. S. Non-destructive testing of objects from electrically conductive materials in pulsed magnetic fields / Defektoskopiya. 2010. N 11. P 29 - 40 [in Russian].
13. Pavlyuchenko V V, Doroshevich E. S. Computer methods for finding the distributions of pulsed magnetic fields near objects from electrically conductive materials / Defektoskopiya. 2016. N 3. P 48 - 56 [in Russian].
14. Rep. Belarus Pat. 18254, IPC CI BY, G 01 N 27/72. Method of magnetic pulse control of electrical and magnetic properties, in particular, electrical conductivity and magnetic permeability, imperfection, as well as the thickness of an object from an electrically conductive magnetic material / V V Pavlyuchenko, E. S. Doroshevich; applicant and owner: BNTU. — N a20111733; appl. 15.12.2011; publ.06.30. 2014. Byull. N 3 [in Russian].
15. Pavlyuchenko V V, Doroshevich E. S. Application of film flux detectors to determine the properties of electrically conductive and magnetic objects / Defektoskopiya. 2018. N 1. P 52 - 57 [in Russian].
16. Pavlyuchenko V V., Doroshevich E. S., Pivovarov V L. Calculations of distributions of pulsed magnetic fields under hysteresis interference / Defektoskopiya. 2018. N 2. P 41 -47 [in Russian].
Review
For citations:
Pavlyuchenko V.V., Doroshevich E.S. DETECTION OF INTEGRITY DEFECTS IN ALUMINUM SPECIMENS BY THE MAGNETIC PULSE METHOD. Industrial laboratory. Diagnostics of materials. 2019;85(4):28-32. (In Russ.) https://doi.org/10.26896/1028-6861-2019-85-4-28-32
Views:
433
Email this article 