Preview

Industrial laboratory. Diagnostics of materials

Advanced search

Recommendations for Test Lab Regarding Transition to New Requirements GOST ISO/IEC 17025–2019

https://doi.org/10.26896/1028-6861-2020-86-2-69-78

Abstract

Since September 1, 2019, GOST ISO/IEC 17025–2019 has been enacted as a national standard in the Russian Federation. The novel standard imposes a number of fundamentally new requirements for testing laboratories (hereinafter referred to as the IL or laboratory), and also supplements and specifies the requirements previously regulated by GOST ISO/IEC 17025–2009. In this regard, in order to transfer laboratories to the new requirements, the FSA issued an order in August 2019 listing the mandatory activities that IL must fulfill to bring their activities in line with the new requirements. However, a transition period desired for matching these requirements is absent on a practical level for a number of the laboratories. The purpose of the article is to facilitate a gentle, efficient and pain-free move from the requirements of GOST ISO/IEC 17025–2009 to the new requirements of GOST ISO/IEC 17025–2019, including compliance with new changes in accreditation criteria. We carried out a comparative analysis of the requirements of the new and previous versions of the standard and marked each new and significant item to which the laboratory should pay attention first of all. The new standard focuses on the application of the process approach, risk and opportunity management, as well as on implementation of the policy of impartiality, independence, minimization of competitive interests and confidentiality. The article describes the planning, implementation and monitoring of each event or phase of the transition of testing laboratories to new requirements. Moreover, the recommendations on the structure of the «Quality Manual» and self-assessment on the compliance of IL activities and QMS with the new requirements, including the use of statistical methods for substantiation of the correctness of the assessment are given as an example of the implementation of IL capabilities.

About the Authors

S. N. Gusarova
National Research Technological University «MISiS» (NRTU «MIS&S»)
Russian Federation

Svetlana N. Gusarova

4 Leninsky prospect, Moscow, 115035



Yu. M. Erokhina
Federal State Unitary Enterprise «All-Russian Research Institute for Standardization of Materials and Technologies» (FSUE «VNIISMT») — LLC «Center for Assistance»
Russian Federation

Yuliya M. Erokhina

27 bld. 8 Obrucheva st., Moscow, 117630



D. I. Kramok
Federal State Unitary Enterprise «All-Russian Research Institute for Standardization of Materials and Technologies» (FSUE «VNIISMT») — LLC «Center for Assistance»
Russian Federation

Darya I. Kramok

27 bld. 8 Obrucheva st., Moscow, 117630



E. I. Khunuzidi
National Research Technological University «MISiS» (NRTU «MIS&S»)
Russian Federation

Elena I. Khunuzidi

4 Leninsky prospect, Moscow, 115035



References

1. ISO/IEC 17025:2017. General requirements for the competence of testing and calibration laboratories. https://www.iso.org/ru/standard/66912.html (accessed February 25, 2019).

2. ISO/IEC 17025:2005. General requirements for the competence of testing and calibration laboratories. https://www.iso.org/ru/standard/39883.html (accessed February 25, 2019).

3. ISO 9001:2015 (E). Quality management systems. Requirements. — Geneva: ISO Copyright office, 2015. — 29 p.

4. Nazarova I. G., Kartashova A. V. The process approach in the quality management system of analytical laboratories / Zavod. Lab. Diagn. Mater. 2003. Vol. 69. N 2. P. 65 – 78 [in Russian].

5. Gusarova S. N., Inkin A. S., Vasilyeva E. V. Using the basic principles of ISO 9000:2000 in the quality management system of testing laboratories / Partn. Konkurenty. 2005. N 4. P. 6 – 11 [in Russian].

6. Gusarova S. N., Erokhina Yu. M., Khunuzidi E. I. Questions of the internal control quality assurance of test’s results in the testing laboratory / Zavod. Lab. Diagn. Mater. 2019. Vol. 85. N 4. P. 64 – 76. DOI: 10.26896/1028-6861-2019-85-4-64-76 [in Russian].

7. Gusarova S. N., Erokhina Yu. M., Kuzmicheva O. V. Using of risk-oriented thinking in testing laboratories / Zavod. Lab. Diagn. Mater. 2019. Vol. 85. N 8. P. 70 – 78. DOI: 10.26896/1028-6861-2019-85-8-70-78 [in Russian].

8. Boldyrev I. V. (Ed.) ISO/IEC 17025:2017. Practical recommendations for use. — St. Petersburg: Professiya, 2018. — 125 p. [in Russian].

9. Gorbunov A. V. Management of risks. Part 1. What is the risk and assessment methodology / Sovr. Lab. Prakt. 2018. Vol. 44. N 4. P. 2 – 6 [in Russian].

10. Ekaterinin M. V. Risk management in the activities of the organization / Kontrol’ Kach. Prod. 2019. N 8. P. 15 – 17 [in Russian].

11. Rozental O. M., Aleksandrovskaya L. N. A risk-based approach to quality management / Kontrol’ Kach. Prod. 2019. N 8. P. 18 – 23 [in Russian].

12. Order of the Ministry of Economic Development of 28.08.2017 No. 5437 «On approval of risk indicators for violation of mandatory requirements by accredited persons». https://fsa.gov.ru/index/statisticview/id/192/.

13. Gusarova S. N., Khunuzidi E. I., Shper V. L. Some possibilities of applying statistical methods in the practice of conducting audits in the light of the guidelines of ISO 19011:2011 / Sovr. Lab. Prakt. 2013. N. 1 (21). P. 7 – 11 [in Russian].

14. Adler Yu. P., Spher V. L. A practical guide to statistical process control. – Moscow: Alpina Publisher, 2019. — 234 p. [in Russian].


Review

For citations:


Gusarova S.N., Erokhina Yu.M., Kramok D.I., Khunuzidi E.I. Recommendations for Test Lab Regarding Transition to New Requirements GOST ISO/IEC 17025–2019. Industrial laboratory. Diagnostics of materials. 2020;86(2):69-78. (In Russ.) https://doi.org/10.26896/1028-6861-2020-86-2-69-78

Views: 1908


ISSN 1028-6861 (Print)
ISSN 2588-0187 (Online)