ELABORATION OF THE NEW SETS OF CERTIFIED REFERENCE MATERIALS OF STEELS FOR SPECTROMETRY
https://doi.org/10.26896/1028-6861-2018-84-1(II)-33-37
Abstract
A number of new sets of certified reference materials were produced by the Institute for Certified Reference Materials (ICRM) for spectral analysis of stainless steels and iron-nickel alloys (LG70 – LG75 and LG76 – ISO LG82) and non-alloyed and low-alloyed steels (UG0l – ISO UG9l). These sets of certified reference materials may be used for calibration and accuracy control in x-ray fluorescence and atomic-emission spectrometry. An experiment was carried out to study the consistency of the data obtained with the new sets and those previously released by ICRM and foreign manufacturers of certified reference materials.
About the Authors
M. V. Tretiakova
Institute for Certified Reference Materials (ICRM)
Russian Federation
Russian Federation
Mariya V. Tretiakova.
YekaterinburgT. I. Ignatenko
Institute for Certified Reference Materials (ICRM)
Russian Federation
Russian Federation
Tatiana I. Ignatenko.
Yekaterinburg
E. A. Lashchenova
Institute for Certified Reference Materials (ICRM)
Russian Federation
Russian Federation
Elena A. Lashchenova.
YekaterinburgA. G. Trofimova
Institute for Certified Reference Materials (ICRM)
Russian Federation
Russian Federation
Alevtina G. Trofimova
YekaterinburgReferences
1. Interstate Standard GOST ISO/MEK 17025–2009. General requirements for the competence of testing and calibration laboratories. — Moscow: Standartinform, 2012. — 28 p. [in Russian].
2. International vocabulary of metrology — Basic and general concepts and associated terms (VIM). — JCG (Joint Committee for Guides in Metrology), 2008.
3. Tretiakova M. V., Trofimova A. G., Samarina G. A. Improvement of the assortiment of reference materials for spectral analysis of carbon steel / Standart. Obraztsy. 2012. N 4. P. 24 – 27 [in Russian].
Review
For citations:
Tretiakova M.V., Ignatenko T.I., Lashchenova E.A., Trofimova A.G. ELABORATION OF THE NEW SETS OF CERTIFIED REFERENCE MATERIALS OF STEELS FOR SPECTROMETRY. Industrial laboratory. Diagnostics of materials. 2018;84(1(II)):33-37. (In Russ.) https://doi.org/10.26896/1028-6861-2018-84-1(II)-33-37
Views:
661
Email this article 