Preview

Industrial laboratory. Diagnostics of materials

Advanced search

Quality Control of Circumferential Welds of Small Diameter Using RAP-120PM X-Ray Unit

Abstract

The results of studying circumferential welds of small diameter present in various structural elements of aerospace engineering are presented. The method is based on the use of modern domestic x-ray tube with a massive target remote from the vacuum volume on a long anode tube. Design of the anode node provides panoramic radiation yield and getting x-ray image of the weld along the entire length in a single exposure. Special technical solutions in the design of the tube and generator of the x-ray device developed to adjust the dimensions of the focal spot provide attaining the required radiographic sensitivity and first and foremost sharpness of the resulting x-ray images. We consider the design and main technical characteristics of a specialized RAP-120PM x-ray unit. The results of using the device in real production conditions at one of the domestic engine-building enterprises of aerospace industry are presented.

About the Authors

E. N. Potrakhov
ЗАО «ЭЛТЕХ-Мед»
Russian Federation


N. N. Potrakhov
Петербургский государственный электротехнический университет (ЛЭТИ)
Russian Federation


A. A. Podumsky
ЗАО «Светлана-Рентген»
Russian Federation


V. B. Bessonov
Петербургский государственный электротехнический университет (ЛЭТИ)
Russian Federation


A. Yu. Gryaznov
Петербургский государственный электротехнический университет (ЛЭТИ)
Russian Federation


References

1. Артемьев Б. В., Буклей А. А. Радиационный контроль: учебное пособие / Под. ред. В. В. Клюева - 2-е изд. - М.: Спектр, 2013. - 192 с.

2. Иванов С. А., Потрахов H. H., Щукин Г. А. Специализированная рентгеновская установка для микродефектоскопии / Электронная техника. 1989. № 2. С. 100 - 101.

3. Потрахов H. H., Шестопалов М. Ю. Диагностика концевых деталей малого диаметра / Контроль. Диагностика. 2012. № 9.С. 28 - 31. «Заводская лаборатория. Диагностика материалов». 2017. Том 83. № 6

4. ГОСТ 7512-82. Контроль неразрушающий. Сварные соединения.- М.: Госстандарт СССР, 1981. - 80 с.

5. Клюев В. В., Кузин М. А., Мужицкий В. Ф. Применение кроулеров в России / Сборник материалов 10-й международной деловой встречи «Диагностика-2000». 2000. Т. 2. С. 104.

6. http://www.ncontrol.ru/catalog/Rentgenovskij-kontrol/Rentgenovskie-kroulery/Rentgenovskij-krouler-Argo-3. Аппарат Арго-3 (дата обращения 10.03.2017).

7. А. с. 1712984 СССР, H01J35/08. Выносной анод рентгеновской трубки / В. М. Мухин, H. Н. Потрахов, Л. А. Пузян - № 4755623; заявл. 3.11.89; опубл. 15.02.92. Бюл. № 6.

8. Пат. 10288 РФ, H01J35/00. Рентгеновская трубка (варианты) / Ключников И. В., Мухин В. H., Потрахов H. H.; заявитель и патентообладатель СПбГЭТУ «ЛЭТИ» - №98121825; заявл. 26.11.98; опубл. 16.06.99. Бюл. № 6.

9. Алхимов Ю. В., Ефимов П. В., Сертаков Ю. И. Цифровые радиационные системы неразрушающего контроля: учебное пособие. - Томск: Изд-во ТПУ, 2012. - 151 с.

10. Куликов Н. А., Сербии В. А., Валуев H. H., Кузьмин Э. В. Рентгеновские трубки / Обзоры по электронной технике. Электровакуумные и газоразрядные приборы. 2003. Вып. 1. С. 10 - 12.

11. Пат. 2278440 РФ, МПК H01J35/02, H05G1/02, A61B6/03. Моноблок источника рентгеновского излучения / Потрахов H. H., Мухин В. М.; заявитель и патентообладатель СПбГЭТУ «ЛЭТИ» - № 2005111813; заявл. 20.04.05; опубл. 20.06.06. Бюл. № 17.


Review

For citations:


Potrakhov E.N., Potrakhov N.N., Podumsky A.A., Bessonov V.B., Gryaznov A.Yu. Quality Control of Circumferential Welds of Small Diameter Using RAP-120PM X-Ray Unit. Industrial laboratory. Diagnostics of materials. 2017;83(6):36-38. (In Russ.)

Views: 341


ISSN 1028-6861 (Print)
ISSN 2588-0187 (Online)