Validation and verification of measurement methods: opinions and views
https://doi.org/10.26896/1028-6861-2023-89-2-II-77-80
Abstract
A brief comparative analysis of the concepts and procedures of "validation" and "verification" appeared in the national regulatory framework in relation to measurement techniques over the introduction of GOST ISO/IEC 17025-2019 which set the requirements for the competence of testing and calibration laboratories is carried out. Conditions for using a specific technique in an analytical laboratory providing reliable results of analyses are formulated proceeding from the regulatory documents: non-standard methods developed by a given laboratory and standard methods but used outside the scope or somehow modified, are the subject to validation; standard methods validated by another laboratory, as well as the methods developed by another laboratory and certified by an authorized organization are to be verified.
About the Authors
E. V. Golubkova
The Institute for Certified Reference Materials (ICRM)
Russian Federation
Russian Federation
Elena V. Golubkova
13-a, UTyanovskaya ul., Yekaterinburg, 620057
I. G. Komina
The Institute for Certified Reference Materials (ICRM)
Russian Federation
Russian Federation
Irina G. Komina
13-a, UTyanovskaya ul., Yekaterinburg, 620057
E. I. Chikantseva
The Institute for Certified Reference Materials (ICRM)
Russian Federation
Russian Federation
Elena I. Chikantseva
13-a, UTyanovskaya ul., Yekaterinburg, 620057
References
1. Nezhikhovskiy G. R. Validation, verification and methods certification / Kontrol' Kach. Prod. 2016. N 9. P 17 - 21 [in Russian] .
2. GOST RISO/IEC 12207-2010. Information technology. System and software engineering. Software life cycle processes. — Moscow: Standartinform, 2011. — 99 p. [in Russian].
3. ISO/IEC 17025:1999. General requirements for the competence of testing and calibration laboratories, https://www.iso.org/standard/30239.html (accessed December 6, 2022).
4. ISO/IEC GUIDE 99:2007. International vocabulary of metrology Basic and general concepts and associated terms (VIM). https://www.iso.org/standard/45324.html (accessed December 6, 2022).
5. GOST ISO/IEC 17025-2019. General requirements for the competence of testing and calibration laboratories. — Moscow: Standartinform, 2021. — 25 p. [in Russian].
6. GOST R ISO 9000-2015. Quality management systems. Fundamentals and vocabulary. — Moscow: Standartinform, 2019. — 48 p. [in Russian].
7. Analytical methods validation. Quantitative description of uncertainty in analytical measurements / G. R. Nizhekhovsky R. L. Cadiz (eds.). — St. Petersburg: TsOP "Professiya", 2016. —312 p. [in Russian].
8. Magnusson В., Ornemark U. (eds.). Eurachem Guide: The Fitness for Purpose of Analytical Methods. A Laboratory Guide to Method Validation and Related Topics. https://www.eurachem.org/images/stories/Guides/pdf/MV_guide_2nd_ed_EN.pdf (accessed December 5,2022).
9. Turkovskiy G. S., Ivanov G. A., Mammedova D., et al. Validation and verification of method: purposes and means for its achievement / Lab. Sluzhba. 2010. N 4. P 3 - 17 [in Russian].
10. Murashova E. V. Verification methods and its difference from validation / Kontrol' Kach. 2020. N 9. P 8 - 13 [in Russian].
11. GOST R ISO 5725-(l - 6)-2002. Accuracy (correctness and precision) of measurement methods and results. Parts 1-6. — Moscow: Gosstandart Rossii, 2002 [in Russian].
12. Recommendations on metrology R 50.2.090-2013. State system for ensuring the uniformity of measurements. Quantitative chemical analysis procedures. General requirements for development, certification and application. — Moscow: Standartinform, 2014. — 17 p. [in Russian].
13. Federal Law N 102-FZ of June 26, 2008 (as amended on December 28,2021) "On Ensuring the Uniformity of Measurements".
14. GOST R 8.563-2009. State system for ensuring the uniformity of measurements. Procedures of measurements. — Moscow: Standartinform, 2010. — 15 p. [in Russian].
15. Order of the Ministry of Industry and Trade of Russia dated December 15, 2015 N 4091 "On Approval of the Procedure for Certification of Primary Reference Methods (Methods) of Measurements, Reference Methods (Methods) of Measurements and Methods (Methods) of Measurements and Their Application".
16. Recommendations on metrology R 50.2.060-2008. State system for ensuring the uniformity of measurements. Implementation of standardized methods for quantitative chemical analysis in the laboratory. Confirmation of compliance with established requirements. — Moscow: Standartinform, 2009. — 11 p. [in Russian].
17. SM N03.1-9.0013. Scheme of testing laboratories (centers) accreditation in the national accreditation system [in Russian]. https://fsa.gov.ru/documents/15069 (accessed December 6, 2022).
Review
For citations:
Golubkova E.V., Komina I.G., Chikantseva E.I. Validation and verification of measurement methods: opinions and views. Industrial laboratory. Diagnostics of materials. 2023;89(2(II)):77-80. (In Russ.) https://doi.org/10.26896/1028-6861-2023-89-2-II-77-80
Views:
845
Email this article 