| |
| Issue |
Title |
| |
| Vol 91, No 5 (2025) |
Evolution of strains and damages at a cyclic elastoplastic deformation with dwells and superimposition on them additional pulsations of loading |
Abstract
|
|
M. M. Gadenin |
| |
| Vol 91, No 5 (2025) |
A study of applicability of instrumented indentation method to determine the mechanical properties of thermoplastic |
Abstract
|
|
A. A. Vinogradova, K. V. Gogolinskiy, E. K. Shchiptsova |
| |
| Vol 91, No 5 (2025) |
Static strength of pultruded fiberglass composites at elevated and reduced temperatures under complex-stress state |
Abstract
|
|
O. A. Staroverov, A. M. Kuchukov, A. M. Kuchukov, V. A. Melnikova, A. S. Elkin, I. V. Sergeichev |
| |
| Vol 90, No 2 (2024) |
On the application of numerical differentiation methods to the determination of the fatigue crack growth rate |
Abstract
|
|
S. A. Monin, M. A. Gorbovets, I. A. Khodinev |
| |
| Vol 90, No 2 (2024) |
Calculation of the stress-strain state of layers of cross-ply laminate based on an experimental stress-strain curves under uniaxial tension |
Abstract
|
|
A. O. Polovyi, N. G. Lisachenko |
| |
| Vol 90, No 2 (2024) |
Installation and test procedure for frequency stability under cyclic loading of metals and alloys |
Abstract
|
|
V. V. Mylnikov, E. A. Dmitriev, D. I. Shetulov |
| |
| Vol 89, No 11 (2023) |
The use of acoustic emission in assessing the ductility loss in steel products under the effect of impact |
Abstract
|
|
N. A. Makhutov, I. E. Vasil’ev, D. V. Chernov, A. Yu. Marchenkov |
| |
| Vol 89, No 11 (2023) |
Fields of residual stresses near open assemblage holes of aircraft wing panel |
Abstract
|
|
S. I. Eleonsky, M. D. Zaitsev, Y. G. Matvienko, V. S. Pisarev |
| |
| Vol 89, No 11 (2023) |
Modes of wear of babbitt-based composite materials produced by hot pressing |
Abstract
|
|
P. A. Bykov, I. E. Kalashnikov, L. I. Kobeleva, I. V. Katin, R. S. Mikheev |
| |
| Vol 89, No 7 (2023) |
Diametral compression of short cylinders with a central hole as a method for assessing the tear resistance of brittle materials |
Abstract
|
|
V. Yu. Goltsev, A. V. Osintsev, A. S. Plotnikov, V. I. Polskij |
| |
| Vol 89, No 7 (2023) |
On the reasons for the premature failure of safety valve springs in the equipment of the primary oil refining |
Abstract
|
|
M. A. Tupitsin, I. A. Trishkina, E. I. Storozheva |
| |
| Vol 89, No 7 (2023) |
Determination of the shaping behavior of thermoplastic composite materials required for simulation of thermoforming |
Abstract
|
|
R. I. Solovyov, A. R. Safin, D. A. Balkaev, V. V. Batrakov, L. M. Amirova |
| |
| Vol 89, No 6 (2023) |
The impact of residual technological stresses on the opening and stability of through cracks in pipeline elements |
Abstract
PDF (Rus)
|
|
A. G. Kazantsev, O. M. Petrov, L. M. Sokov |
| |
| Vol 89, No 6 (2023) |
Assessment of the residual life of turbine runners with operational defectiveness |
Abstract
PDF (Rus)
|
|
E. V. Aniskovich, V. V. Moskvichev, A. P. Chernaev |
| |
| Vol 89, No 6 (2023) |
Study of the impact of fatigue loading on the durability of aircraft slat membrane eyelets |
Abstract
PDF (Rus)
|
|
D. V. Grinevich, I. V. Gulina, N. O. Yakovlev, D.-S. V. Dzandarov, A. A. Glagovskii, Yu. V. Ermakova |
| |
| Vol 89, No 4 (2023) |
Cyclic behavior of heat resistant nickel-base alloys EP741NP and EI698VD under strain-control loading |
Abstract
PDF (Rus)
|
|
A. D. Khudiakova, A. N. Servetnik, M. E. Volkov, S. B. Polianskii |
| |
| Vol 89, No 4 (2023) |
Study of changes in the mechanical and acoustic properties of epoxy resins under long-time polymerization |
Abstract
PDF (Rus)
|
|
K. A. Drachev, A. V. Kazarbin, V. I. Rimlyand |
| |
| Vol 89, No 4 (2023) |
Neural network approximation of deformation curves under uniaxial tension of steel and silumin specimens |
Abstract
PDF (Rus)
|
|
L. V. Khlivnenko, V. V. Eliseev, A. M. Goltsev |
| |
| Vol 89, No 2(I) (2023) |
Analysis of the efficiency of advanced methods of in-plane shear testing of highstrength CFRP specimens |
Abstract
PDF (Rus)
|
|
A. G. Popov, N. V. Matyushevsky, N. G. Lisachenko |
| |
| Vol 89, No 2(I) (2023) |
Effect of oxidation on mechanical properties and surface condition of heat-resistance titanium alloy VT41 |
Abstract
PDF (Rus)
|
|
O. S. Kashapov, L. E. Reshetilo, S. A. Naprienko, P. N. Medvedev |
| |
| Vol 89, No 2(I) (2023) |
Trajectories of principal stresses after plastic deformation |
Abstract
PDF (Rus)
|
|
V. N. Semykin, V. N. Protsenko, A. V. Besko, D. A. Sviridov |
| |
| Vol 88, No 8 (2022) |
The features of the evaluation of the results of experimental data in interlaboratory comparison tests for low-cycle fatigue |
Abstract
|
|
N. Yu. Podzhivotov |
| |
| Vol 88, No 8 (2022) |
Two-parameter elastic-plastic fracture criterion and corrected fracture toughness |
Abstract
|
|
Yu. G. Matvienko |
| |
| Vol 88, No 8 (2022) |
Heating appliance used to study vibration strength of the structures at a temperature near 1300 °C |
Abstract
|
|
V. A. Lupsha, N. D. Muraviev, V. V. Bairak, M. I. Marchenko, A. N. Doronin |
| |
| Vol 88, No 5 (2022) |
A probabilistic approach to the description of the crack kinetics and fatigue failure of structural components with allowance for the effect of crack retardation after overloads |
Abstract
|
|
N. A. Makhutov, Y. G. Matvienko, D. O. Reznikov |
| |
| Vol 88, No 5 (2022) |
Stress-strain response properties of the KhN55MVTs nickel alloy under uniaxial compression and their mathematical modeling |
Abstract
|
|
S. P. Samoilov |
| |
| Vol 88, No 5 (2022) |
Physico-mechanical characteristics and multiscale stochastic modeling of cement mortar reinforced with oil palm mesocarp fibers |
Abstract
|
|
M. S. Bisong, V. V. Lepov, T. Landrine |
| |
| Vol 88, No 4 (2022) |
Approximation of non-linear in-plain shear stress-strain diagrams of unidirectional and cross-ply reinforced polymer matrix composites |
Abstract
|
|
A. O. Polovyi, N. G. Lisachenko |
| |
| Vol 88, No 4 (2022) |
The impact of holes on the reduction of the strength of composite specimens with different laying of fibers |
Abstract
|
|
N. A. Tatus, A. N. Polilov, D. D. Vlasov |
| |
| Vol 88, No 4 (2022) |
Features of fatigue and damage-tolerance tests of full-scale metal-composite aircraft structures |
Abstract
|
|
K. S. Shcherban, A. Y. Sterlin, K. Y. Famin |
| |
| Vol 88, No 2 (2022) |
Method for improving the accuracy and safety of pneumatic loading of fuselages during fatigue test |
Abstract
|
|
A. Y. Sterlin, K. S. Shcherban, M. P. Borisov |
| |
| Vol 88, No 2 (2022) |
Study of the plastic deformation of metals by indentation method |
Abstract
|
|
E. I. Oreshko, N. O. Yakovlev, V. S. Erasov, D. A. Utkin |
| |
| Vol 88, No 2 (2022) |
Conversion of the kinetic indentation diagrams of ball indenter into stress-strain curves for metallic structural materials |
Abstract
|
|
V. M. Matyunin, A. Yu. Marchenkov, P. V. Volkov, M. A. Karimbekov, D. A. Zhgut, M. P. Petrova, N. O. Veremeeva |
| |
| Vol 87, No 12 (2021) |
Evaluation of the threshold for the development of fatigue cracks in a railway steel under harmonic and operational loading |
Abstract
|
|
S. G. Lebedinsky, O. V. Naumov |
| |
| Vol 87, No 12 (2021) |
Procedure for determining the constants of JH-2 (Johnson – Holmquist) dynamic fracture model for brittle materials |
Abstract
|
|
O. G. Krutova, N. N. Berendeev, V. N. Chuvildeev, N. V. Melekhin |
| |
| Vol 87, No 7 (2021) |
Study of the properties of materials under complicated conditions of low cycle deformation |
Abstract
|
|
N. A. Makhutov, М. M. Gadenin, О. F. Cherniavsky, A. О. Cherniavsky |
| |
| Vol 87, No 7 (2021) |
The influence of the technological cycle of production on the change in the physical and mechanical characteristics of bimetal with a butt welded joint in the cladding layer |
Abstract
|
|
D. V. Nonyak, I. V. Denisov, О. L. Pervukhina |
| |
| Vol 87, No 7 (2021) |
Modeling of elastic-plastic deformation of the ring parts as applied to the analysis of the results of testing the material of the fuel-element cladding |
Abstract
|
|
V. M. Markochev |
| |
| Vol 87, No 3 (2021) |
Determination of the effective stiffness of a unidirectional layer by the finite element method and approximate formulas |
Abstract
|
|
I. P. Olegin, T. V. Burnysheva, N. A. Laperdina |
| |
| Vol 87, No 3 (2021) |
Evaluation of the brittleness and viscosity of metals upon tensile testing |
Abstract
|
|
Yu. V. Bugrov, A. A. Hlybov, M. K. Chegurov |
| |
| Vol 87, No 3 (2021) |
The impact of flow-accelerated corrosion on the crack developing in welded joints of NPP equipment and pipelines |
Abstract
|
|
D. A. Kuz’min |
| |
| Vol 87, No 2 (2021) |
Developing of the optimal shape and reinforcement structure of the specimen for adequate determination of the tensile strength in unidirectional composites |
Abstract
|
|
A. N. Polilov, D. D. Vlasov, N. A. Tatus’ |
| |
| Vol 87, No 2 (2021) |
On notch fracture mechanics |
Abstract
|
|
G. Pluvinage |
| |
| Vol 86, No 1 (2020) |
Kinetics of the multidirectionality of elastic-plastic fracture with allowance for anisotropy of the material properties |
Abstract
PDF (Rus)
|
|
Nikolai A. Makhutov, Ivan V. Makarenko, Leonid V. Makarenko |
| |
| Vol 86, No 1 (2020) |
Experimental study of the functional and mechanical properties of shape memory polymer composites for a reflector of the space antenna |
Abstract
PDF (Rus)
|
|
Egor V. Moskvichev, Alexey Yu. Larichkin |
| |
| Vol 86, No 1 (2020) |
Study of the dynamic hardness of structural metal materials |
Abstract
PDF (Rus)
|
|
Aleksandr V. Ilinskiy, Alexey V. Fedorov, Ksenia A. Stepanova, Igor U. Kinzhagulov, Igor O. Krasnov |
| |
| Vol 85, No 12 (2019) |
The effect of heating and thermocycling on the mechanical properties of carbon steel rope wire |
Abstract
PDF (Rus)
|
|
V. M. Matyunin, A. Yu. Marchenkov, P. V. Volkov, V. Yu. Volokhovsky, A. N. Vorontsov, V. V. Goncharov |
| |
| Vol 85, No 12 (2019) |
Study of the character and causes of destruction of the cardan shaft of the propeller engine |
Abstract
PDF (Rus)
|
|
D. A. Movenko, L. V. Morozova, S. V. Shurtakov |
| |
| Vol 85, No 12 (2019) |
The impact toughness and mechanism of low-carbon steel fracture at low temperatures |
Abstract
PDF (Rus)
|
|
A. M. Ivanov, N. D. Kovalenko |
| |
| Vol 85, No 6 (2019) |
ANALYSIS OF THE KINETICS AND DIRECTIONALITY OF ELASTOPLASTIC DEFORMATION AND FRACTURE |
Abstract
PDF (Rus)
|
|
N. A. Makhutov, I. V. Makarenko, L. V. Makarenko |
| |
| 1 - 50 of 71 Items |
1 2 > >>
|
